Back to Blog
How-to Guides 2026-11-16 CEN 0 views

Viofo MT1 Motorcycle Dash Cam: Dual-Channel Wiring and Setup

Viofo MT1 Motorcycle Dash Cam: Dual-Channel Wiring and Setup

Plan a dual-channel motorcycle dash cam install around the Viofo MT1: confirm what the kit includes, route front and rear cameras, and set up Wi-Fi, GPS and the remote.

Start with what the MT1 kit actually gives you

The Viofo MT1 is a dual-channel 1080p motorcycle dash cam: a front and a rear camera record the road ahead and behind. The supplied kit includes a 32GB microSD card, built-in Wi-Fi and GPS, a Bluetooth remote control, and auto turn-on/off. The cameras are rated IP66 for water and dust resistance, and the lens angle is 170°.

Those facts shape the install. Because the MT1 records two channels, you have two camera positions to plan and two cable runs to protect. Because it is IP66, the camera units are built for weather exposure, but the supplied information does not describe the water resistance of connectors, cable joints or the main unit, so treat every connection as something to keep out of standing water and spray. And because the kit includes a 32GB card, you can test recording before you buy anything else.

Viofo MT1: supplied capabilities that affect installation

Plan the two camera positions before you run any cable

Mounting decisions come first because they set cable length, cable routing and how much trim you remove. The supplied information does not specify a required mounting angle, distance from the road, or a particular bracket position, so use the bike’s own layout and the 170° lens coverage as your guide.

  1. Front camera: Choose a stable, forward-facing point with a clear view of the road. Avoid a spot that is blocked by the front wheel, fork movement or a tank bag. The 170° angle is wide, but it still needs an unobstructed lens.
  2. Rear camera: Pick a rear-facing point that sees behind the bike without being blocked by the tail, luggage or a passenger. Keep the lens clear of the exhaust and moving suspension parts.
  3. Cable routes: Trace both camera cables toward the main unit before you commit to a mounting point. Keep runs away from hot exhaust parts, sharp frame edges and steering or suspension travel. The supplied information does not specify cable lengths, so confirm reach on your own bike before drilling or trimming.
  4. Remote control: The kit includes a Bluetooth remote control. Decide where it can be reached safely while riding, and keep its mounting separate from the camera lenses.

Power wiring: what to confirm before you connect

The MT1 supports auto turn-on/off, which means it is designed to follow the bike’s ignition state rather than being switched by hand. The supplied information does not include a wiring diagram, fuse ratings, wire colors or a required connection point, so do not guess those details. Use the instructions that come with the unit and confirm the positive, negative and ignition-switched connections against your motorcycle’s own wiring before you make any joint.

For motorbike dash cam power wiring, the practical checkpoints are simple: make connections that stay mechanically secure under vibration, protect them from water and strain, and keep the main unit where it will not sit in a puddle or direct spray. If the supplied instructions do not name a fuse rating or connection location, that is a gap to resolve with the manufacturer’s documentation or a qualified motorcycle technician, not something to estimate.

Set up Wi-Fi, GPS and the remote after the first power-up

  • Confirm both channels record: With the included 32GB microSD card installed, start a recording and check that the front and rear views are both captured. The MT1 is a dual-channel system, so a single working view is not a complete test.
  • Check the Wi-Fi connection: The MT1 has built-in Wi-Fi for wireless access. The supplied information does not name a companion app or list supported phone versions, so check the manufacturer’s current app requirements before you rely on phone playback.
  • Verify GPS logging: The built-in GPS logger records location data with your footage. After the first ride, review a clip to confirm GPS data is present. The supplied information does not specify satellite acquisition time, so allow the unit to settle before judging the result.
  • Pair the Bluetooth remote: The kit includes a Bluetooth remote control. Pair it and test it in a safe, stationary setting before you rely on it while riding.
  • Watch auto turn-on/off: Start and stop the bike to confirm the MT1 powers up and shuts down with the ignition as intended. If it does not behave as expected, revisit the ignition-switched connection rather than adding a manual switch.

What the supplied information does not settle

Several details that matter for a real install are not confirmed by the supplied product information: cable lengths, fuse ratings, the exact power connection points, the companion app and phone compatibility, and any specific mounting torque or angle. Those are not reasons to avoid the MT1; they are reasons to keep the manufacturer’s instructions and your bike’s wiring diagram on the bench while you work.

The MT1’s IP66 rating covers the camera units against water and dust, but the supplied information does not extend that rating to every connector or cable joint you create. Seal and route your own connections accordingly, and recheck them after the first wet ride.

Related Articles

Customer Service
Home
Products
Cart
Profile