ブログに戻る
ハウツーガイド 2026-11-20 CEN 0 ビュー

How to Choose a Waterproof Rear Camera Cable for Your Dash Cam

How to Choose a Waterproof Rear Camera Cable for Your Dash Cam

Learn how to select the right waterproof rear camera cable for your dash cam. Compare lengths, compatibility, and key features for Viofo and BlackVue systems.

Why the Cable Matters for Your Rear Dash Cam Setup

A waterproof rear camera cable connects your dash cam's front unit to a rear camera mounted outside the vehicle. Unlike standard interior cables, a waterproof cable is sealed against moisture, making it suitable for exterior installation on hatchbacks, SUVs, vans, or trucks. Choosing the wrong cable can lead to signal loss, poor video quality, or physical incompatibility.

The two main factors are cable length and connector type. Most dual-channel dash cams require a coaxial cable that matches the rear camera's plug and the front unit's port. Some systems use a proprietary connector, while others follow a standard coaxial format. Always verify the cable is designed for your specific dash cam model before purchasing.

Viofo vs BlackVue: Two Approaches to Rear Camera Cables

The Viofo and BlackVue dash cam ecosystems use different cable designs, so the right choice depends on your dash cam brand and mounting location.

  • Viofo RWC400 Cable (7.5m): This coaxial cable works exclusively with the Viofo A329 series (including A329S, A329SW, A329T, A329TW, and A329WW). It connects the waterproof RWC400 rear camera to the dash cam's rear camera port. At 7.5 meters, it provides enough length to route the cable through the headliner and door trim to the rear of most sedans, SUVs, and wagons. The cable acts as a plug-and-play replacement for the interior-mount RC420 rear camera cable, allowing you to install the rear camera outside the vehicle.
  • BlackVue 6m Coaxial Video Cable (6m): This 6-meter coaxial cable is compatible with all BlackVue DR models that use a coaxial video connector. It connects the front and rear cameras of a dual-channel BlackVue dash cam. Note that older models (DR590/DR590W series, DR490-2CH, DR490L-2CH) require an analog video cable instead. For BlackVue ELITE dash cams, use the dedicated ELITE cables (6Gbps). The 6m length is typically sufficient for compact to mid-size vehicles.

Key Factors to Consider When Choosing a Cable

Use these checkpoints to narrow your options before buying.

  • Dash cam model compatibility: Check that the cable is explicitly listed as compatible with your dash cam model. For example, the Viofo RWC400 cable is only confirmed for the A329 series. The BlackVue 6m cable works with all BlackVue DR models using a coaxial video connector, but not with analog-only models or ELITE series.
  • Cable length: Measure the approximate routing path from the front dash cam to the rear camera mounting point. The Viofo cable offers 7.5m, suitable for larger vehicles. The BlackVue cable is 6m, which may be tight for long SUVs or vans. If you need to go around the rear seat or through the tailgate, add extra length for slack.
  • Waterproof rating: The Viofo RWC400 cable is designed as a waterproof rear camera cable, making it suitable for exterior mounting. The BlackVue cable is described as coaxial video cable; its waterproof rating is not specified in the supplied information. If your rear camera mounts outside, prioritize a cable explicitly labeled as waterproof.
  • Connector type: The Viofo cable uses a coaxial connector that plugs into the A329 series rear camera port. The BlackVue cable uses a coaxial connector compatible with all DR models that accept coaxial video. Do not assume interchangeability between brands or even between different BlackVue model generations.

Product Evidence: Viofo and BlackVue Cables

  • Viofo Replacement RWC400 Waterproof Rear Camera Cable 7.5m for A329 Series: The Viofo RWC400 cable is 7.5m long and designed for the A329 series (A329, A329S, A329SW, A329T, A329TW, A329WW). It connects the waterproof rear camera to the power source and works as a plug-and-play replacement for the standard interior-mount RC420 rear camera. If you own a Viofo A329 series dash cam and want to mount the rear camera outside, this cable is the only confirmed option. The 7.5m length provides flexibility for routing in larger vehicles.
    Viofo Replacement RWC400 Waterproof Rear Camera Cable 7.5m for A329 Series
    Viofo Replacement RWC400 Waterproof Rear Camera Cable 7.5m for A329 Series
  • BlackVue 6m Coaxial Video Rear Camera Cable for Dual 2 Channel Dash Cam: The BlackVue 6m coaxial video cable connects front and rear cameras for dual-channel BlackVue dash cams. It is compatible with all DR models using a coaxial video connector, but not with DR590/DR590W series, DR490-2CH, or DR490L-2CH (which need analog video cables). For ELITE dash cams, use ELITE cables (6Gbps). BlackVue owners must verify their dash cam model's connector type. The 6m length is standard but may not suit very long vehicles. The cable is not confirmed as waterproof, so consider mounting location carefully.
    BlackVue 6m Coaxial Video Rear Camera Cable for Dual 2 Channel Dash Cam
    BlackVue 6m Coaxial Video Rear Camera Cable for Dual 2 Channel Dash Cam

Installation Tips for a Reliable Connection

Before routing the cable, plan the path from the front dash cam to the rear camera mounting point. Avoid sharp bends or pinching the cable against metal edges, as this can damage the coaxial core. Use cable clips or adhesive mounts to secure the cable along the headliner, door trim, or tailgate grommet.

For exterior-mounted rear cameras, ensure the cable's connector is properly sealed against moisture. The Viofo RWC400 cable is designed for this purpose. For interior-mounted rear cameras (e.g., on the rear window), a standard interior cable may suffice, but a waterproof cable adds extra protection against condensation or accidental spills.

If you are replacing an existing cable, disconnect the old cable at both ends and compare the connectors. The Viofo cable is a direct plug-and-play replacement for the RC420 interior cable, so no additional wiring is needed. For BlackVue systems, confirm the connector type matches your dash cam model.

関連記事

Customer Service
ホーム
商品
カート
マイページ